ABSTRACT socio-economic development of India. The backbone of

Topics: BusinessManagement

Type:

Sample donated:

Last updated: September 22, 2019

ABSTRACTA Polyhouse is abuilding where plants are grown. Polyhouses are often used for growing flowers,vegetables and fruits plant.

Basic factors affecting plant growth are humidity,water content in soil, temperature, etc. These physical elements are hard tocontrol manually within a Polyhouse and a need for automated prototype arises.Polyhouse automatic control is imperative for the plants to provide them with propernutrients in the controlled manner. To monitor the greenhouse environmentparameters effectively, it is necessary to plan a control system. Itcommunicates with the a variety of sensor modules in order to maintain  the temperature, humidity and soil moistureefficiently inside a greenhouse by operating a cooler, fogger, dripper andlights according to the necessary condition of the crops. Many differenttechniques have been proposed and implemented for this purpose. This papermainly reviews different  presentGreenhouse Monitoring and control systems.1.

Don't use plagiarized sources.
Get Your Custom Essay on "ABSTRACT socio-economic development of India. The backbone of..."
For You For Only $13.90/page!


Get custom paper

INTRODUCTION In this modern era of industrialization,agriculture plays a notable role on the overall socio-economic development ofIndia. The backbone of Indian Economy is Agriculture.43% of India’ s territorycomes under agricultural lands. Around 52% of India’ s population is gettingemployment only because of agriculture along with other  related fields like forestry and logging .

Agriculture also accounts for 8.56% of the country’ s total exports. Accordingto a survey made in 2007, agriculture accounts for 16.6% of India’ s GrossDomestic Product. In India, the most influential field as compared to others isagriculture, which perhaps needs more emphasis on better agricultural practices.

Crop growth is mainly influenced by the surrounding environmental climaticvariables, the amount of water supplied and the fertilizers used forirrigation. By regular monitoring of the soil conditions and environmentalconditions the quality of agriculture can be increased. Polyhouse is ideal forproper plant growth and high yield of the crop, where the climatic ingredientscan be controlled automatically. Polyhouse cultivation is the modern, intensiveand is considered highly productive and environment friendly agriculturepractice. Polyhouses are constructed by assigning an ultraviolet plastic sheetof thickness 1501m which lasts for a minimum of 5 years. It is constructed  using bamboos or iron pipes. In general thelength of polyhouses is 25-30 feet and width of 4-5 feet. The size of thepolyhouse may vary according to the requirement.

Mostly the polyhouses arealways directed towards East to West which allows the polyhouse to utilize themaximum sunlight. Irrespective of the season the temperature and humiditylevels can be a-utomatically controlled in the polyhouse thus resulting inproper plant growth and high yield of the crop. The existing variations in thedemand and supply of off-season for vegetables and fruits can be lowered byadopting automation and moden machinery.

2. ProposedTechnologies2.1 Wireless Solutionfor Polyhouse Cultivation Using Embedded System2.1.1 INTRODUCTIONIn this, the continuousmonitoring and control of environmental parameters inside the polyhouse usingmobile communication is proposed. To fulfill this requirement of providingproper temperature inside the polyhouse, the environmental parameter sensorssuch as temperature sensor and humidity sensor are used. These sensors providesthe information about temperature and humidity inside the polyhouses, thesesensors are used with AT89S52 microcontroller which continuously receive thedata from sensors and whenever the received values goes beyond the giventhreshold value, cooling fans will be turned on to lower the temperature andincrease humidity and vice versa as the system is programmed accordingly.

Thesame information is conveyed to the farmer and central monitoring and controlunit of PC using Global System for Mobile Communication (GSM). The architectureof the proposed system has been shown in Fig 1.  2.1.2 ADVANTAGES·        By short message service (SMS) the statusof environmental fators and  varyingthreshold values of polyhouse can be controlled from any remote location usingthe farmer mobile phone.·        The reduced human effort and ideal stateof environmental parameters inside the polyhouse can be observed in itsresults.

·        By using the proposed system, the farmercan easily keep the desired crop’s environment conditions.2.1.3 DISADVANTAGES·        It does not check the soil moisturewhich is an important aspect on which the production of crops matters.·        It does not measure the intensity oflight inside the polyhouse , proper control of light is important as light isvery important for photosynthesis.·        It does not have any technology toutilize the rain water.2.

2 Design andDevelopment of Embedded System for Measurement of Humidity, Soil Moisture andTemperature in Polyhouse using 89E516RD Microcontroller2.2.1 INTRODUCTIONThis research workmainly consists of design and development of an embedded system for polyhouseapplication.

This system includes 89E516RD microcontroller with three sensorssuch as humidity sensor (SY-HS-220), soil moisture sensor (YL-69) and temperaturesensor (PT100) employed inside polyhouse 5, 6, 7. Signal conditioningcircuits of respective sensor, data acquisition system, display unit andcontrolling section have been properly designed. The software required forsensor data acquisition, display and to control humidity, temperature and soilmoisture inside polyhouse by using suitable hardware of the system is developedby using Keil µ-vision IDE 8. The designed system is used for measurement ofthe mentioned environment condition and results are interpreted. Thearchitecture of this system is shown in fig 2.2.2.2 ADVANTAGES·        It provides accurate measurement ofhumidity, soil moisture and temperature and also provides automated controlaction.

·        This can satisfy more accuracy formedium and large area based polyhouses.2.2.3 DISADVANTAGES·        It does not measure the intensity oflight inside the polyhouse , proper control of light is important as light isvery important for photosynthesis.

·        It does not have any technology toutilize the rain water.2.3 AUTOMATION INPOLYHOUSE USING PLC         2.3.1INTRODUCTIONIn this system threetypes of sensors are implemented . The sensors to be used are photodiodes, atemperature sensor and a humidity sensor.

These sensors will be connected to aPLC which will function as the main control unit. The sensors will send signalsto the plc and the plc will translate the signals and determine if the input iswithin the preset range. For instance, if the preset temperature range is from20°C to 25°C, the plc will make sure that the polyhouse temperature iswithin  this range. If the temperature exceedsthe maximum value, the plc will then turn on the fan. If the temperature dropsbelow the minimum value, the bulb will turn on. As for the photodiode, if thepolyhouse is exposed to insufficient light, it will send a signal to the plc.The plc will then process the signal and turn on the artificial light in thepolyhouse.

As for the humidity sensor, it will detect a change in humiditylevels of soil and send a signal to the plc. If the humidity level is notwithin the required range, the water supply will be turned on or off. The plcwill be the central processing unit which will translate the input signals fromthe sensors and turn on or off the necessary devices to maintain the polyhouseat the preset levels.2.3.2 ADVANTAGES·        This ensures that the environment insidethe polyhouse is suitable for productive uses.·        This helps improve crop quality andquantity.  2.

3.3 DISADVANTAGES·        It does not check the soil moisturewhich is an important aspect on which the production of crops matters.·        It does not have any technology toutilize the rain water.2.

4 Design of RemoteMonitoring and Control System with Automatic Irrigation System usingGSM-Bluetooth2.4.1 INTRODUCTIONIn this system both GSMand Bluetooth modules are interfaced with the main controller chip. GSM is usedfor remotely monitoring and controlling the devices via a mobile phone bysending and receiving SMS via GSM network. Bluetooth is used for the samepurpose but within a range of few meters, say when user is inside the peripheryof the building where the system is installed, Bluetooth can be used forcommunicating with the devices thereby eliminating the network usage cost. Themotor pumps and fans are controlled automatically using sensor and the otherappliances are controlled by Bluetooth or GSM network via SMS. The systeminforms user about any abnormal conditions like low water detection andtemperature rise via SMS from the GSM Module      to the user’s mobile and actions aretaken accordingly by the user. The architecture of this system is displayed infig 4Fig 4.

Block Diagram ofRemote Monitoring and Control System with Automatic Irrigation system usingGSM-Bluetooth2.4.2 ADVANTAGES·        There is no network usage cost.·        Efficient utilization of power.2.4.3 DISADVANTAGES·        The farmer has to be educated about howto use the technology.·        Implementation cost is higher.

·        It does not have any technology toutilize the rain water.2.5 PIC MicrocontrollerBased Greenhouse Monitoring and Control System2.5.1 INTRODUCTIONproposed systemaim  is to design a Microcontroller-basedcircuit to monitor and record the values of temperature, humidity, soilmoisture level and Sunlight of the natural environment that are continuouslymodified and it is get controlled in order optimize them  to achieve maximum plant growth and yield.Controlling process takes place effectively. Depending upon the application, wewill set particular threshold level for each climatic parameter. When any ofparameters level cross a safety threshold then microcontroller will perform theneeded action by employing relay until the strayed-out parameter has beenbrought back to its optimum level.

The block diagram below shows how the inputssection (sensors) is connected into the microcontroller through an arrow, thearrow indicate that data is passing through the microcontroller. The outputsection is connected out of the microcontroller through the arrow. Furthermore,the input section are assign to their own pins in the microcontroller andprocessed to give an output, while output section are assign to their own pinsin the microcontroller, to archive the construction of greenhouse controldevice.

E2PROM is also connected to microcontroller for storing the values ofvarious parameters present at that situation.Fig 5: Block diagram ofPIC Microcontroller based Greenhouse Monitoring and Control system2.5.

2 ADVANTAGES·        Provides real time application .·        Beneficial for farmers of manydeveloping countries.2.5.3 DISADVANTAGES·        Implementation cost is high.

·        It does not measure the intensity oflight inside the polyhouse , proper control of light is important as light isvery important for photosynthesis.·        It does not have any technology toutilize the rain water.2.6 GreenhouseManagement Using Embedded System and Zigbee Technology2.6.1 INTRODUCTIONThe system modelconsists of sensors, microcontroller, interface such as relay and actuators.Actuators such as ventilation fan, sprayer, heater, water pump, artificiallights are used.

Our proposed system aim is to design a microcontroller-based circuit to monitor and record the valuesof temperature, humidity, soil moisture level and sunlight of the naturalenvironment that are continuously modified and it is get controlled in orderoptimize them to achieve maximum plant growth and yield. Controlling processtakes place effectively by both automatically and manually. Depending upon theapplication, we will set particular threshold level for each climaticparameter. when any of parameters level cross a safety threshold thenmicrocontroller will perform the needed action by employing relay(motor driver)until  the strayed-out parameter  has been  brought back  to its  optimum  level. Manual controlling process is done byzigbee wireless network whenever necessary. Whose receiver side of zigbee isconnected to PC in control room .VISUAL BASIC software is used here, whichhelps us to transmit the data back through zigbee wireless network tocontroller to perform, needed control action.

Automatic controlling processtakes place in the greenhouse environment itself as per designingmicrocontroller based circuit to monitor and control various parameters.   Fig 6 Architecture ofGreenhouse Management Using Embedded System and Zigbee Technology2.6.2 ADVANTAGES·        This has both automatic and manualcontrol of the system.·        When any of input module ie., sensorsdoes not work properly required actions is not get performed.

At that time ,zigbee wireless sensor network based controlling process can be used.2.6.3 DISADVANTAGES·        It does not check the soil moisturewhich is an important aspect on which the production of crops matters.·        It does not have any technology toutilize the rain water.2.7 MICROCONTROLLERBASED POLYHOUSE CONTROL SYSTEM 2.

7.1 INTRODUCTIONThe system provides anability to monitor Temperature, Level, Humidity and Moisture contain in soil.The heart of system is 89CSlmicrocontroller. This is embedded microcontrollerchip which has computer processor with all it support function (clock andreset), Memory (both program and data) and I10 (including bus interface) builtin to device. These built in function minimize the need for external circuitsand devices to be designed in the final application. The system works with5Volt DC power supply. A Moisture sensor, specially designed to sense theamount of water content in the soil, also called the “Gypsum sensor”provides moisture content information in terms of change in resistance.

Thischange in resistance is used to provide a proportional change in analog voltagewithin certain voltage limits. The signal can then be covered to digital form,so as to be processed as per the systems requirements with the use ofmicrocontroller. The software burned within the microcontroller then cancontrol a valve. A set of valves, that in-turn controls the water supply to thefield to maintain the soil moisture condition within present limits, they alsocontrol temperature and humidity within set limit. The block diagram consistsof the sensors and signal conditioning circuit for the Temperature, Level.

Humidity and moisture measurement. The sensors and signal conditioning blockwill convert the physical quantity in to analogous voltage.Fig 7 Block Diagram ofMicro-Controller Based Poly House Controller2.

7.2 ADVANTAGES·        Works satisfactory as per therequirement·        Helps in optimum utilization of waterfor irrigation2.7.3 DISADVANTAGES·        It does not measure the intensity oflight inside the polyhouse , proper control of light is important as light isvery important for photosynthesis.·        It does not have any technology toutilize the rain water.2.8 Controlling andEnvironmental Monitoring Of Polyhouse Farm Through Internet2.8.

1INTRODUCTIONThe parameterstemperature, Humidity, Soil moisture, are monitored and controlled using ARM processor ,transmitted throughthe RS232 to the VB based monitor unit and then to the android mobile phone viaa Wi-Fi or internet connection.  Allsensor values that are collected from the greenhouse were displayed on the LCDscreen. Development process of hardware is a structure imposed on thedevelopment which including Printed Circuit Board (PCB) design using DIPTRACEsoftware. In this system, C Compiler software is used for programming. Thisprogram can receive data with microcontroller and stored in database. By usingC Compiler software, Temperature sensor, humidity sensor, rs232 device and alsoLCD display were interfaced with the microcontroller.

This program will startfrom the greenhouse where the sensors will collect the environmental data inanalog form. By using KEIL software sensor data collected are in analog formand will be converted to digital form using ADC converter in themicrocontroller. Then, the data were transmitted through RS232 to PC. The datareceived was displayed on the LCD screen shows the interfacing between the LCDdisplay and a ARM7 microcontroller.

Overall, in the polyhouse the systemmonitoring temperature and humidity then transmitted through wireless WIFI andthe data are monitored on the LCD display.2.8.2 ADVANTAGES·        Useful in hazardous applications ·        Quick response time·        Whole system is Fully automated ·        Robust system, require low power2.8.3 DISADVANTAGES·        It does not measure the intensity oflight inside the polyhouse , proper control of light is important as light isvery important for photosynthesis.·        It does not have any technology toutilize the rain water.

                                S.No. PROPOSED SYSTEM LIGHT SENSOR HUMIDITY SENSOR MOISTURE SENSOR TEMPERATURE SENSOR RAINWATER HARVESTING 1 Wireless Solution for Polyhouse Cultivation Using Embedded System NO YES NO YES NO 2 Design and Development of Embedded System for Measurement of Humidity, Soil Moisture and Temperature in Polyhouse using 89E516RD Microcontroller NO YES YES YES NO 3 AUTOMATION IN POLYHOUSE USING PLC         YES YES NO YES NO 4 Design of Remote Monitoring and Control System with Automatic Irrigation System using GSM-Bluetooth NO YES YES NO NO 5 PIC Microcontroller Based Greenhouse Monitoring and Control System NO YES YES YES NO 6 Greenhouse Management Using Embedded System and Zigbee Technology YES YES NO YES NO 7 Microcontroller Based Polyhouse Control System NO YES YES YES NO 8 Controlling and Environmental Monitoring Of Polyhouse Farm Through Internet NO YES YES YES NO     3. CONCLUSIONVarious climaticparameters have to  be monitored andcontrolled to improve the crop productivity. To monitor these parametersvarious sensors like temperature sensor to monitor the temperature, Humiditysensor to monitor the air moisture content, Soil moisture sensor to monitor thesoil moisture content, light intensity sensor to monitor the amount of lightinside the polyhouse are used. The required climatic parameters information canbe acquired from the polyhouse environment using these sensors. In order tomonitor all the above said parameters require large number of sensors andwires. These sensors obtain the data and various steps are taken to achieve thetarget conditions inside the polyhouse.

These conditions are achieved usingfans, foggers, coolers, heaters, etc. There are two common disadvantages  in the proposed technologies. First none ofthe technologies have all the four sensors i.

e. humidity sensor, temperaturesensor, light sensor and soil moisture. Second none of the systems have atechnique to utilise rain water for irrigation of the crop inside thepolyhouse. Thus  new system has to bedeveloped which has all the sensors and a technique to utilise rainwater forirrigating the crop inside the polyhouse.     

Choose your subject

x

Hi!
I'm Jessica!

Don't know how to start your paper? Worry no more! Get professional writing assistance from me.

Click here