Type: Evaluation Essays
Sample donated: Melinda Harris
Last updated: July 23, 2019
Effect of Surface Treatment on the Micro-Shear Bond Strength to Resin Composite after Water AgingResin composite is a standard approach that is applied in the restoration of different materials in the dental practice since it comes with multiple benefits such as the adhesion, esthetics, mechanical properties, and the conservative. The process of repair also plays a significant role in restoring the lifetime of the composite restorations where silane is used in the repairing procedure. The effect of surface treatment on the micro-shear strength are different as a result of the unequal; fillers. The primary objective of this study is to determine the effect of surface treatment on the micro-shear bond strength to resin composite after water aging. Several studies have evaluated the repair bonding strength in composite resins. Various surface treatments influence the repair strength in composite restorations.
The use of an intermediate layer, whether an adhesive agent alone or in combination with a silane coupling primer, has been proposed to improve surface wetting and chemical bonding to the surface. The following table is a summary of the materials that are used in the experiment to determine the effect of Surface Treatment on the Micro-Shear Bond Strength to Resin Composite after Water Aging;Table 1: Summary of Materials used in Surface Treatment Experiments on the Shear Bond Strength
|Clearfil AP-X||Kuraray, Okayama, Japan||Bis-GMA, TEGDMA.||Silanated Ba glass, silanated colloidal SiO2, silanated SiO2(0.1–15 µm)|
|FiltekTM Supreme||3M ESPE, St. Paul, MN, USA||Bis-GMA, UDMA, Bis-EMA, TEGDMA.||SiO2/SrO2clusters (0.
8–1.4 µm), SiO2(20 nm)
|Estelit sigma Quick Universal Composit||Tokuyama Dental, Japan||Bis-GMA, TEGDMA.||Silica–zirconia fillers, silica–titania fillers.|
|Beautiful II||Shofu Inc., Kyoto, Japan||Bis-GMA, TEGDMA.||Aluminofluoro-borosilicate glass, S-PRG filler.|
|Clearfi l SE One||Kuraray Noritake Dental,Tokyo, Japan||MDP, Bis-GMA, HEMA, hydrophobicDMA, sodium fluoride, silanatedcolloidal silica, accelerators, initiators,CQ, ethanol, water (pH 2.3)|
|Clearfil Porcelain Bond Activator: PA||Kuraray Noritake Dental Inc., Japan)||MPS, hydrophobic aromatic dimethacrylate|
Discussion on the MaterialsThe Beautiful IIThe Beautifil II that has the aluminiflour borosilicate glass, and the S-PRG filler, and it has been made to stimulate the internal structure to deal with the ideal light (Kubo, 2000). It is also known to having a perfect versatility with the long lasting natural shade that is perfect in enhancing different processes (Abdel-karim, 2014). The high fill we load as well as the flexural ability improves the long-lasting stability under strenuous conditions in both the internal and the external restorations that are useful in laminating the core build-ups (Shofu, 2013).
It is also fast and easy in polishing creating an outstanding surface that lusters the remains over a certain time, which is essential for the process (Shofu, 2013b). It has the following fillers; Aluminofluoro-borosilicate glass, S-PRG filler (Cariology, 2016)Figure 1: The Micro-shear Bond Strength (Source: Cariology, 2016)Figure 2: The Failure Mode (Source: Cariology, 2016)Clearfil AP-XFigure 3: The Clearfil AP-X (Source: Dentimarc, 2012)This is light-cure, and the radiopaque restorative resin is providing the precise color matching with high physical properties such as the high ploshability that result to the outstanding interior and external restorations (Kuraray, 2011). The material is suitable for the process since it has a substantial strength and durability (Kuraray, CLEARFIL AP-X, 2015).
It can be polishable, and it is easy to be handled (Kuraray, Clearfil AP-X , 2015). It also contains enough radiopacity and has high restoration capacity. It has the following fillers Silanated Ba glass, silanated colloidal SiO2, silanated SiO2 (0.
1–15 µm) (Cariology, 2016)Figure 4: The Micro-shear bond strength Figure 5: The failure modeFigure 6: FiltekTM Supreme (Source: 3M ESPE 2016)The FiltekTM Supreme used in the experiment contains an excellent polish that enhances the retention of the microfill, it also has an advanced fluorescence (Science, 2013). It is easy to use and provides the color that is coded by both the opacity and the bold that identifies and reads labels fast (ESPE, 2010). It is also provides improved handling of the translucent shades (ESPE, Filtek™ Supreme XTE U, 2010).
The remarkable interior of the FiltekTM Supreme poses an outstanding strength with a broad range of both the shades and this is accompanied by the expanded selection of the shades (ESPE, 2014). The 3M ESPE`s gives it the capacity to handle the nanofiller technology giving it the restorations for both the strength and the esthetics (Cariology, 2016). The shades without the translucent, white and the extra shades are applicable in enhancing the clinician’s ability in recreating the lifelike appearance of the natural elements (ESPE, 2016). The shading is however achieved through the intensive analysis of the colors such as the value, hue and the chroma that results in the visual perception of the esthetic composite restoration. However, the efficiency of the material is enhanced in such a way that the translucent shades have the combination of the non-agglomerates silica nanofiller that is bound to the silica nanocluster that has the agglomerates of the primary silica nanoparticles approximately 75nm in size (Cariology, 2016). This size is expected to range between the 0.6 and 1.
4 microns. The fillers, in this case, are; SiO2/SrO2clusters (0.8–1.4 µm), SiO2 (20 nm) (Cariology, 2016). During an experiment, there are two modes that are used to describe the results and these are Micro-shear bond strength (MPa), and the failure mode which can be represented by the following graphs (Cariology, 2016).Figure 7: The Micro-shear bond strength Figure 8: The Failure ModeFigure 9: Estelit sigma Quick Universal Composit (Source: Tokuyama, 2010.) It is a supra- nano that contains restorative material using approximately 100% spherical filler technology (Tokoyuma, 2016).
The material can provide equal diffusion of light that permits the forgiving shade and the superb blend during the experiment (Tokuyama, 2015). It also has the spherical fillers that create less wear of the interior content. It also provides an exceptional polishability as well as the long term polish retention. This is accompanied by the unique versatility creamy that is non-stick in handling the great resistance that may take place during the experiment (Tokuyama, Estelite Sigma Quick (2013 Product Award), 2010). The following are the importance of using the equipment; it has impressive polishability, high gloss retention, supra-nano spherical and gentle in opposing the detention.
The fillers are; silica–zirconia fillers, silica–titania fillers (Cariology, 2016).Figure 10: The Micro-shear Bond Strength Figure 11: The Failure ModeFigure 12: Clearfi l SE One (Source: Kuraray, 2012) The material is pure with the light cure bonding system that has a water-based primer (Kuraray, 2012). The ability to provide enhanced bonding gives it both the strength and the sealing properties that are applied to the all light-cured restoration.
It also has the Outer Case that permits the delivery system to direct the contents in finger control at the same time (Morales, 2009). It has some benefits when used in the experiment such as fast and easy to use, lack of decalcification, strong bond in dentin, and the porcelain (Anon, 1999). There are direct filling restorations that use the light-cure composite, the surface has the prosthetic appliances that are made up of porcelain, hybrid ceramics as well as the cured composite resin (Asande, 2009). The following are its composition MDP, Bis-GMA, HEMA, hydrophobic DMA, sodium fluoride, silanated colloidal silica, accelerators, initiators, CQ, ethanol, water (pH 2.3 (Cariology, 2016)).In conclusion, the effect of surface treatment on the micro-shear strength are different as a result of the unequal; fillers.
The primary objective of this study is to determine the effect of surface treatment on the micro-shear bond strength to resin composite after water aging. The above materials are made with unique qualities to ensure that the process is efficient. The most important element in all the materials is the ability to restore. References3M ESPE. (2016). 3M ESPE Dental Supplies. Retrieved from http://solutions.
3m.co.uk/wps/portal/3M/en_GB/3M_ESPE/Dental- Manufacturers/Products/Dental-Restorative-Materials/Dental-Composites/Dental- Nanocomposites/Abdel-karim, U. (2014). Three-year clinical evaluation of two nano-hybrid giomer restorative composites. Tanta Dental Journal , 213-222.
Anon. (1999). Clearfi l SE . Retrieved 2016, from Dental Advisor: http://www.kuraraynoritake.eu/pub/media/pdfs/clearfil-se-bond-clinical-report-en.pdfAsande (2009).
Bonding of one-step and two-step self-etching primer adhesives to dentin with different tubule orientations. Pub Med , 159-168.Cariology. (2016). Effect of Surface Treatment on The Micro-Shear Bond Strength to Resin Composite After Water Aging. Cariology and Operative Dentistry, Department of Oral Health Sciences , Slide 1-18.
Dentimarc. (2012). AP’X. Retrieved from http://dentimarc.com/apx–kuraray-catalogo.htmlESPE.
(2014). 3M ESPE Dental Supplies. Retrieved 2016, from ESPE: http://solutions.3m.co.uk/wps/portal/3M/en_GB/3M_ESPE/Dental- Manufacturers/Products/Dental-Restorative-Materials/Dental-Composites/Dental- Nanocomposites/ESPE. (2016). 3M ESPE Filtek™ Supreme Plus Universal Restorative (10 yr).
Retrieved 2016, from The Dental Advisor: https://www.dentaladvisor.com/evaluations/3m-espe-filtek- supreme-plus-universal-restorative-10-yr/ESPE. (2015). 3M verwendet Cookies auf dieser Website. Retrieved from 3M ESPE Dentalprodukte: http://solutions.
3mdeutschland.de/wps/portal/3M/de_DE/3M_ESPE/Dental- Manufacturers/Products/Dental-Restorative-Materials/Dental-Composites/Dental- Nanocomposites/ESPE. (2010). Filtek™ Supreme XTE Universal Restorative. Retrieved 201, from Dental Products: http://solutions.3m.com.au/wps/portal/3M/en_AU/3M-ESPE-APAC/dental- professionals/products/category/composites/filtek-supreme-ultra/Kubo.
(2000). Three-year clinical evaluation of a flowable and a hybrid resin composite in non- carious cervical lesions. J.
Dental , 191-200.Kuraray. (2015). Clearfil AP-X . Retrieved August 26th, 2016, from Kuraray Dental: http://www.kuraraynoritake.eu/pub/media/pdfs/clearfil-ap-x-brochure-en.
pdfKuraray . (2011). CLEARFIL AP-X. Retrieved August 26th, 2016, from The Dental Advisor: http://kuraraydental.com/product/composites/clearfil-ap-xKuraray. (2015).
CLEARFIL AP-X. Retrieved August 26th, 2016, from Kurray Noritake Dental Inc: http://www.kuraraynoritake.com/wd/adhesives-and-composite-resin/clearfil-ap-x- esthtetics/Kuraray.
(2012). CLEARFIL SE BOND. Retrieved 2016, from Kuraray: http://kuraraydental.com/product/bonding-agents/clearfil-se-bondMorales, A.
P. (2009). Can previous acid etching increase the bond strength of a self-etching primer adhesive to enamel? Retrieved 2016, from Brazil Oral Research: http://www.scielo.
br/scielo.php?script=sci_arttext&pid=S1806-83242009000200013Science. (2013). Filtek™ Supreme Ultra Universal Restorative. Retrieved August 26th, 2016, from Science Applied to Life: http://www.3m.com/3M/en_US/company-us/all-3m- products/~/Filtek-Supreme-Ultra-Universal- Restorative?N=5002385+8707795+8707799+8710720+8711017+8711722+8713393+32 94736391&rt=rudShofu. (2014).
Beautifil II. Retrieved August 25th, 2016, from Minimally Invasive Cosmetic Dentisity: http://www.shofu.
com/shofu_images/Literature/beautifil%20ii%20brochure.pdfShofu. (2013). Beautifil II Restoratives.
Retrieved August 25th, 2016, from Shofu Dental Corpoeration: http://www.shofu.com/en/products/restoratives/composites/beautifil-ii/Shofu. (2013). Shofu Dental Corporation. Retrieved from Shofu Dental Corporation: http://www.
shofu.com/en/products/restoratives/composites/beautifil-ii/Shofu. (2015). Beautifil II. Retrieved August 25th, 2016, from The Dental Advisor: https://www.dentaladvisor.
com/evaluations/beautifil-ii/Tokoyuma. (2016). Estelit sigma Quick Universal Composit. Retrieved 2016, from Composite Universal: http://www.
(2015). Estelite Sigma Quick. Retrieved 2016, from Tokuyama: http://www.tokuyama-us.com/Product/Composites/Estelite_Sigma_QuickTokuyama. (2010).
Estelite Sigma Quick (2013 Product Award). Retrieved 2016, from Dental Advisor: https://www.dentaladvisor.com/evaluations/estelite-sigma-quick-2013-product- award/